The DMX512.com Forum

General Category => DMX512 Discussions => Topic started by: phil34uk on January 02, 2011, 01:09:25 PM

Title: New to DMX hooking up scanners
Post by: phil34uk on January 02, 2011, 01:09:25 PM

Hi, i'm completely new to lighting and DMX in particular.  At the moment i've got 4x Martin MX4 scanners which are set sound to light.  Also on the back truss we have 4 standard led par cans which are controlled by DMX.  I want to incorporate the scanners so I can also control them by DMX, I've read the manual but it's quite confusing for me.  I need to know how I have to set the lights and also do I run them on 1 channel mode or 6 etc.  Any help would be greatly appreciated.

Title: Re: New to DMX hooking up scanners
Post by: brian8harris on April 16, 2011, 01:20:13 PM

Here you can get some help regarding your problem:

http://forums.elationlighting.com/eve/forums/a/tpc/f/4981062842/m/397109006
http://www.onstagelighting.co.uk/lighting-equipment/stage-lighting-control/dmx-lighting-systems/
http://blog.whitesites.com/SDE-Lighting-60-watt-LED-Intelligent-DMX-Scanner-Review__634347414945312500_blog.htm